• 2021-11-15

In the early stage of plastic injection mold and part development, the most concerned of our customers is how long does the injection mold manufacture take? In the market, whether it is electronic products, medical products or environmental protection equipment, there will be new generations version every day. Time is money, moreover, time is the life of a company. This is what most entrepren...

• 2021-11-15

How to select the standard mold base steel as a custom plastic injection molds vendor? As we all know, to choose the right mold base saves time and helps to improve mold life. The stamping die has a stamped mold base, and the injection mold has a mold base for the injection mold. In the mold industry park, there are generally local mold base factories and large-scale national mold b...

• 2021-11-15

√ With us, you can save time and money. We are factory, to work with us can avoid the trader commission √Our engineering team has extensive industry experience and project management skills, as well as good technical English and efficient communication. √Fully meet your quality standards, all mold components for export molds are manufactured in accordance with DME, HASCO standards, such as guide p...

• 2022-09-01

Design Optimization and Processing Standard of Injection Mold Inserts With the increasing demand for various types of molds in the market like the Automotive Plastic Injection Molds, the Consumer Electronics Plastic Injection Molds, the mold industry has developed very rapidly in recent years. With the development of the mold industry; with the upgrading of processing equipment, the requirements f...

• 2022-10-19

Lyter Engineering Design of Gate and Runner Arrangement of Plastic Injection Molds We strive to optimize the injection mold design. It mainly refers to the optimization of the design of the gating system and the cooling system. The selection of the gate form and location is very important. The following we will discuss the gating system research and design.           ...

• 2022-10-19

Lyter Engineering_Design of Gate and Runner Arrangement of Plastic Injection Molds (2) The principle of runner arrangement   1) Make the distance of melten plastic material from the sprue to each gate as equal as possible. 2) Make the pressure center of the cavity coincide with the center of the injection machine as much as possible. Balanced arrangement of runners 1) Natural balance: Th...