• 2021-11-12

How to Distinguish the Grade of Injection Mould? Let’s take a look at the five major classifications of SPI Plastic Injection Mould Standard. The American Plastics Industry Association (SPIAN-102-78) divides molds into five standard categories. These five types of Plastic Injection Moulds each have different requirements. This classify is only suitable for molds with Plastic Injection Molding...

• 2021-11-15

In the early stage of plastic injection mold and part development, the most concerned of our customers is how long does the injection mold manufacture take? In the market, whether it is electronic products, medical products or environmental protection equipment, there will be new generations version every day. Time is money, moreover, time is the life of a company. This is what most entrepren...

• 2021-11-15

When molding a plastic injection tooling, there is a problem that often plagues the producer, that is, the injection molded part will have the ejector stress mark. Generally, there are two kinds of phenomena, one is slightly mark, that is, under the fluorescent lamp, the product and the human eye can only be seen at an angle of 45 degrees. If this happens, is this plastic case not usable? This dep...

• 2021-11-15

Precision Plastic Injection Mold Customization Process Lyter Engineering Ltd. - Injection Mould Vendor With the rapid advancement of Intelligent machinery, China manufacturing is now closer to the developed countries of the world, with the high-efficiency and low-cost world as the world factory, China's manufacturing has also been preferred and recognized by all countries. In recent...

• 2021-11-15

Why Precision Plastic Injection Mold Prices Differ Among Different Suppliers？ This may confuse many of our friends when searching for the precision plastic molds making sources. For someone who understand the mold processing it can be understandable, however for the people who is not familiar with the processing, it is rather than a trouble, how to evaluate, what are the reasons that make the pric...

• 2021-11-15

With thousands of plastics on the market which will be used for the plastic injection molding, it can be a daunting task to decide which type is the best for your next lot size manufacturing project. When choosing which plastic to use, there are going to be trade-offs between cost, moldability, surface finish, durability, strength and many others.  The choice of plastic depends on not only wh...

• 2021-11-15

There are many factors that will affect injection mould quality, here LYTER Engineering, as a Chinese Plastic Injection Mould Supplier, we listed some of them for your reference. 1. Mold Steel Steel is the decisive factor in the quality of injection molds, and choose the right steel is the top priority. The standard for choosing steel are as below ①Injection molding materi...

• 2021-11-15

Injection Mould Manufacturing Today, we are going to share some basic common sense in our injection mold manufacturing process. Since the 1980s, the molds have been developed all the way. Some friends around are talking about injection molds, hardware molds, from time to time. You may ask: What it is the injection mold? Mold is not only the mother of industry, but also the foundation of ...

• 2021-11-15

What Parameters Do We Need to Focus On During the Injection Molding Process? High-quality plastic molded parts must be based on high-quality plastic injection moulds. There are no high-quality molds, there will have no quality products, even with a powerful injection molding technician. Just like the old saying, no women can cook good dinner without ingredients. However, high-quality plastic ...

• 2021-11-15

Mold flow analysis is to use current CAE software (Moldflow, C-Mold, Z-Mold, etc.) to perform finite element simulation on the plastic parts injection molding, packing, cooling, and warping processes. Mold flow analysis steps First, the continuous parts are discretized by meshing. A limited number of easy-to-analyze elements are used to describe complex objects, and the elements are connected by a...

• 2021-11-15

How to select the standard mold base steel as a custom plastic injection molds vendor? As we all know, to choose the right mold base saves time and helps to improve mold life. The stamping die has a stamped mold base, and the injection mold has a mold base for the injection mold. In the mold industry park, there are generally local mold base factories and large-scale national mold b...

• 2021-11-15

The rapid development of mold manufacturing technology has become an important part of modern manufacturing technology. Such as the CAD/CAM technology of the mold, the laser rapid prototyping technology of the mold, the precision forming technology of the mold, the ultra-precision processing technology of the mold, and the finite element method and the boundary element method are used for the dyna...