• 2021-11-15

When molding a plastic injection tooling, there is a problem that often plagues the producer, that is, the injection molded part will have the ejector stress mark. Generally, there are two kinds of phenomena, one is slightly mark, that is, under the fluorescent lamp, the product and the human eye can only be seen at an angle of 45 degrees. If this happens, is this plastic case not usable? This dep...

• 2021-11-15

Precision Plastic Injection Mold Customization Process Lyter Engineering Ltd. - Injection Mould Vendor With the rapid advancement of Intelligent machinery, China manufacturing is now closer to the developed countries of the world, with the high-efficiency and low-cost world as the world factory, China's manufacturing has also been preferred and recognized by all countries. In recent...

• 2021-11-15

Die Casting Process (Fully automatic die casting cycle) Mold cleaning Mold preheating Paint spraying Placement of inserts Mold closing Pouring Press injection Solidification Open the mold Push out and take the parts Die casting can be divided into two categories : hot chamber die casting machine pressure casting and cold chamber die casting machine pressure casting, of which cold chamber die casti...

• 2021-11-15

The difference between die-casting molds and plastic injection molds Plastic mold is an abbreviation for a combined plastic mold like compression molding, extrusion molding, injection molding, blow molding and low foam molding. The die-casting mold is a method of casting liquid die forging, a process performed on a dedicated die-casting die forging machine. The difference between pl...

• 2021-12-17

Hot runner technology, with its unique technical advantages such as cost saving and shortening the molding cycle, has become an important field of plastic injection molding process. The installation of the hot runner is directly related to the quality of the product. The following are the precautions for the installation of thehot runner mold: Place the mold, level the upper mold, and clean all th...

• 2022-04-29

Die Casting Process Advantages and Disadvantages  Die casting: It uses high pressure to press molten metal into the cavity of a precision metal mold at high speed, and the molten metal cools and solidifies under pressure to form castings. Die Casting Characteristics Advantages: 1. During die casting, the metal liquid is subjected to high pressure and fast flow rate 2. Good product quality, st...