• 2021-11-12

How to Distinguish the Grade of Injection Mould? Let’s take a look at the five major classifications of SPI Plastic Injection Mould Standard. The American Plastics Industry Association (SPIAN-102-78) divides molds into five standard categories. These five types of Plastic Injection Moulds each have different requirements. This classify is only suitable for molds with Plastic Injection Molding...

• 2021-11-15

Precision Plastic Injection Mold Customization Process Lyter Engineering Ltd. - Injection Mould Vendor With the rapid advancement of Intelligent machinery, China manufacturing is now closer to the developed countries of the world, with the high-efficiency and low-cost world as the world factory, China's manufacturing has also been preferred and recognized by all countries. In recent...

• 2021-11-15

Why Precision Plastic Injection Mold Prices Differ Among Different Suppliers？ This may confuse many of our friends when searching for the precision plastic molds making sources. For someone who understand the mold processing it can be understandable, however for the people who is not familiar with the processing, it is rather than a trouble, how to evaluate, what are the reasons that make the pric...

• 2021-11-15

There are many factors that will affect injection mould quality, here LYTER Engineering, as a Chinese Plastic Injection Mould Supplier, we listed some of them for your reference. 1. Mold Steel Steel is the decisive factor in the quality of injection molds, and choose the right steel is the top priority. The standard for choosing steel are as below ①Injection molding materi...

• 2021-11-15

Injection Mould Manufacturing Today, we are going to share some basic common sense in our injection mold manufacturing process. Since the 1980s, the molds have been developed all the way. Some friends around are talking about injection molds, hardware molds, from time to time. You may ask: What it is the injection mold? Mold is not only the mother of industry, but also the foundation of ...

• 2021-11-15

What Parameters Do We Need to Focus On During the Injection Molding Process? High-quality plastic molded parts must be based on high-quality plastic injection moulds. There are no high-quality molds, there will have no quality products, even with a powerful injection molding technician. Just like the old saying, no women can cook good dinner without ingredients. However, high-quality plastic ...

• 2021-11-15

We often hear that CNC machining centers are divided into hard rails and linear rails. Customers will ask when purchasing a machining center: Is the hard rail better or the linear rail better? What is the difference between the two? 01 What is a hard track? What is a linear track? The hard rail refers to a casting in which the guide rail and the bed are integrated, and then the guide rail is proce...

• 2021-11-15

Mold flow analysis is to use current CAE software (Moldflow, C-Mold, Z-Mold, etc.) to perform finite element simulation on the plastic parts injection molding, packing, cooling, and warping processes. Mold flow analysis steps First, the continuous parts are discretized by meshing. A limited number of easy-to-analyze elements are used to describe complex objects, and the elements are connected by a...

• 2021-11-15

Die Casting Process (Fully automatic die casting cycle) Mold cleaning Mold preheating Paint spraying Placement of inserts Mold closing Pouring Press injection Solidification Open the mold Push out and take the parts Die casting can be divided into two categories : hot chamber die casting machine pressure casting and cold chamber die casting machine pressure casting, of which cold chamber die casti...

• 2021-11-15

The difference between die-casting molds and plastic injection molds Plastic mold is an abbreviation for a combined plastic mold like compression molding, extrusion molding, injection molding, blow molding and low foam molding. The die-casting mold is a method of casting liquid die forging, a process performed on a dedicated die-casting die forging machine. The difference between pl...

• 2021-12-10

During Injection Molding, there will not be much molten material in the vent hole, because the molten material will cool and solidify at the place to block the channel. The opening position of the exhaust port should not be facing the operator to prevent accidental spraying of molten material and hurting people. The clearance between the ejector rod and the ejector hole, the clearance between...

• 2022-03-21

Shenzhen Covid Affect Plastic Injection Mould Industry After a whole week semi lockdown, Shenzhen Covid has been controlled in a safe level. We are happy to announce that Lyter Engineering Ltd. recover fully manufacturing from today.   It is suffering for plastic injection mould industry since the Covid, however, our team still strictly abides by the anti-epidemic and epidemic prevention poli...